Locating Leakage

The GLD4100 Locating Leakage Detector can monitor the leakage situation in the environment in real time. It can quickly detect the specific location of the leakage. Once the leakage is detected, the controller will issue an alarm and display the leakage information on the LCD panel of the controller. It can also transmit the leakage information through the RS485 communication interface. At the same time, it will activate a relay to output the switch signal. This leakage controller has been programmed according to the MODBUS-RTU protocol, which is convenient for integration with the monitoring system and can monitor up to 500 meters of the sensing cable.

The power supply of the GLD4100 Locating Liquid Leakage Controller is 12-24VDC wide voltage supply. It has one relay output. It can be connected to RS485 (MODBUS-RTU protocol). It can monitor the leakage detection cable up to 500 meters. Once the leakage is detected, its response time is less than 3 seconds. It is installed in a 35mm rail mounting method, and can be flexibly installed in the cabinet.

The GLD4100 Locating Liquid Leak Controller has obtained certifications such as CE, ROHS, FCC, and those from the metrology institute.

It is applicable to liquid leakage detection in fields such as data centers, semiconductors, new energy, photovoltaic power, petroleum and petrochemicals, and power environment systems. It not only can detect water, but also can detect leaks of various acidic and alkaline liquids.

The GLD4100 Locating Liquid Leakage Controller can be used with GDL4/GDL4B Locating Leak Detection Cables, GDL5 Locating Leak Detection Tape, GDL4S Locating Acid-Base Leakage Detection Cables, GDL4Y Fuel Leakage Detection Cables, etc.