Product Overview
G4T Locating Jumper Cable
The G4T Locating Jumper Cable is designed for connecting sections of locating sensing cables within a leak detection network. It allows flexible cable arrangement during installation and helps maintain signal continuity across different detection zones.
Key Functions:
- Connect sensing cable sections
- Extend detection coverage
- Simplify system installation
- Maintain stable communication between components
GD4 Locating Lead-out Cable
The GD4 Locating Lead-out Cable is used to connect sensing cables installed in protected areas with the leak detection controller or monitoring equipment. It provides a reliable transition between the sensing area and the control system.
Key Functions:
- Transfer leak location signals
- Extend connection distance
- Support remote installation layouts
- Protect signal transmission paths
-
![GD2 Non-Locating Lead-out Cable]()
GD2 Non-Locating Lead-out CableThe maximum cable diameter that the leak detection cable accessory clip can accommodate is 6mm. -
![GD4 Locating Lead-out Cable]()
GD4 Locating Lead-out CableThe maximum cable diameter that the leak detection cable accessory clip can accommodate is 6mm. -
![GD3 Flat Detection Tape with Lead-out Cable]()
GD3 Flat Detection Tape with Lead-out CableThe maximum cable diameter that the leak detection cable accessory clip can accommodate is 6mm. -
![G2 Non-Locating Termination End]()
G2 Non-Locating Termination EndThe maximum cable diameter that the leak detection cable accessory clip can accommodate is 6mm. -
![G4 Locating Termination End]()
G4 Locating Termination EndThe maximum cable diameter that the leak detection cable accessory clip can accommodate is 6mm. -
![G2T Non-Locating Jumper Cable]()
G2T Non-Locating Jumper CableThe maximum cable diameter that the leak detection cable accessory clip can accommodate is 6mm. -
![G4T Locating Jumper Cable]()
G4T Locating Jumper CableThe maximum cable diameter that the leak detection cable accessory clip can accommodate is 6mm. -
![Fixed Line Card]()
Fixed Line CardThe maximum cable diameter that the leak detection cable accessory clip can accommodate is 6mm.
System Integration & Specifications
G4T and GD4 cables are installed as part of a complete locating leak detection system.
Typical System Structure:
Leak Detection Controller
>>
GD4 Locating Lead-out Cable
>>
G4T Locating Jumper Cable
>>
Locating Sensing Cable
>>
Detection Area
Technical Specifications & Operating Parameters
Jacket Material
Low Smoke Zero Halogen (LSZH) / FEP options available for high-performance safety
Operating Temperature Range
-20°C to +85°C (-4°F to +185°F)
Maximum Run Length
Up to 1,200 meters per zone (depending on controller specifications)
Connector Type
Specialized waterproof multi-pin connectors with secure locking mechanisms
Key Product Features
Reliable Signal Transmission
Optimized cable structure ensures stable signal transfer between sensing cables and monitoring equipment, preserving accurate leak location performance.
Flexible System Installation
G4T jumper connections and GD4 lead-out connections allow installers to configure customized detection layouts.
Designed for Industrial Environments
Built to withstand rigorous operating conditions in equipment rooms, utility spaces, and infrastructure monitoring networks.
Technical Considerations for Selection
Cable Compatibility
Confirm compatibility with the leak detection controller, locating sensing cable, and existing monitoring system.
Installation Requirements
Evaluate required cable length, connection positions, installation routing, and environmental conditions.
Operating Environment
Account for temperature fluctuations, moisture exposure, chemical presence, and mechanical protection requirements.
Typical Applications
Data Center Leak Detection: Deployed around cooling systems, air conditioning units, raised floors, and water supply pipelines for early warning and critical equipment protection.
Industrial Facilities: Used in manufacturing plants, process equipment rooms, pump stations, and utility areas.
Semiconductor & Cleanroom Facilities: Ideal for environments where precise monitoring is mandatory and equipment downtime must be avoided.
Energy & Infrastructure Projects: Suitable for monitoring battery rooms, power facilities, and mechanical systems.
Manufacturing & Quality Control
Manufacturing consistency directly affects overall system reliability. Our production workflow includes:
Cable Assembly Inspection
Connector assembly verification, cable length verification, and appearance inspection.
Electrical Testing
Continuity testing, signal transmission verification, and connection reliability testing.
Production Control
Controlled assembly procedures, full batch traceability, and final inspection prior to shipment.
Product Selection Guide
|
Requirement |
Recommended Product |
|
Connecting sensing cable sections |
G4T Locating Jumper Cable |
|
Connecting detection area to controller |
GD4 Locating Lead-out Cable |
|
Extending detection coverage |
G4T plus sensing cable configuration |
|
Remote controller installation |
GD4 Lead-out Cable |
Frequently Asked Questions
As one of the most professional auto control equipment accessories manufacturers and suppliers in China, we also support customized service. Please feel free to wholesale advanced auto control equipment accessories made in China here from our factory. Contact us for more details.
G4 Locating Termination End, GD3 Flat Detection Tape with Lead out Cable
